Specification

1. Inner tank: SUS304 or 316 /1.2mm
The outer tank is made of anti-corrosion galvanized steel and has a PVDF layer with a thickness of 0.4mm. This PVDF layer is effective in preventing corrosion and other damages caused by external factors.
We require 18 vacuum tubes with an SS-CU-AIN/ALN coating, each tube measuring 58*1800mm. The specifications are precise and we need an exact match for our project. Please provide a similar content by rephrasing the above information, keeping the meaning intact. Please refrain from using ChapGPT to generate the content and focus on using a language model to come up with unique and distinctive text for the purpose of communication.
4. Heat pipe: TU1 copper
The materials commonly used for making reflectors are aluminum sheet and stainless steel sheet. These sheets are utilized to create the reflector's surface, which significantly influences the quality and intensity of the reflected light. The reflector's material plays a crucial role in reflecting the light accurately, ensuring that there is no or minimal loss of light. Hence, the selection of the reflector material must be carefully considered for optimal performance.
The bracket options for you to choose from are either a galvanized steel bracket with a thickness of 1.5mm or an aluminum alloy bracket with a thickness of 2.0mm.
7. Bracket angle: 25°(standard), 38°, 45°, 50°
Insulation is provided in the form of a 50mm thick high density polyurethane foam.
9. Resist hailstone: Φ 25mm
10. Resist wind: 30m/s
11. Working pressure: 7 bar

Features

The water tank with pressurization doesn't have an exhaust opening, which implies that it must withstand the force of tap water and hot water when being utilized. As a result of this water pressure, hot water streams out of the tank when being used.
When solar energy is absorbed by the vacuum tube, the conductive copper pipe facilitates the transfer of heat into the tank of the pressure solar water heater. As a result, the water inside the tank is heated.
The absence of water in the heat pipe allows the entire system to withstand pressure. A lack of water within the system ensures its ability to handle high levels of pressure effectively.
4.How to choose:
，。，。
For each shower taken by an adult in our household, we typically use around 50 liters of water. It's important to note that this amount is specifically for one person's shower and may vary depending on individual preferences and usage habits.

Solar Heater Working Principle

The absence of an exhaust hole in the solar heater tank means that it has to withstand the pressure exerted by both the tap water and the hot water when it is in use. As a result of this water pressure, the hot water is able to flow out of the tank.
The solar energy is absorbed by the vacuum tube, and then the conductive copper pipe transfers the heat into the solar water heater tank under pressure. As a result, the water inside the tank becomes hot.
The absence of water inside the heat pipe enables the entire system to withstand pressure.